#CHARGE IT BATTERY CHARGER MANUAL FULL#

This may also mean the charger has detected a battery problem - for instance, its ability to take or hold a charge. The voltage will drop as soon as the charger shuts down, turning the charger back on. If the charger's green LED begins blinking when you connect the charger clips to the battery, the amperage in-rush current to the battery is reaching the pre-set shut-off voltage and the charger is shutting down. The rate of the flashing is dependent on the battery type, its rated capacity, the degree of discharge, its age, the temperature, as well as the amperage rating of the battery charger. When should I use a 2-amp, 10-amp, 12-amp, or 15-amp charge rate?ДЄll automatic battery chargers in the automotive market today have some sort of voltage regulation to prevent overcharging the battery.As such, occasionally monitoring the battery and the charging process is recommended. However, problems with the battery, electrical problems in the vehicle, improper connections or other unanticipated conditions could cause excessive voltage draws. NOTE: The maintain mode technology utilized in SchumacherвЂ™s maintainers allows you to safely charge and maintain a healthy battery for extended periods of time. The voltage is maintained at a level determined by the BATTERY TYPE selected. The cycle will continue, and the CHARGED LED will stay on for longer periods of time as the battery becomes more fully charged.

#CHARGE IT BATTERY CHARGER MANUAL FULL#

The CHARGED LED will cycle on when the battery is at full charge and off when the voltage drops below a preset level and the charger goes into Charge Mode. The charger automatically switches between Charge Mode and Maintain Mode as necessary. If the battery voltage drops below a preset level, the charger will go back in to Charge Mode until the battery voltage returns to the full charge level, which at this point the charger will return to Maintain Mode. In this mode, the charger keeps the battery fully charged by delivering a small current when necessary. When the CHARGED LED is lit the charger has started Maintain Mode. Microprocessor controlled battery chargers are faster, safer and certainly more efficient than 'old school' transformer type battery chargers. Microprocessor controlled battery chargers can remain connected to the battery indefinitely and will not overcharge or damage it. The multi-phase charging process ensures that each battery gets the power it needs in a manner that is best for the health of the battery ensuring that all of the energy is properly absorbed by the battery whether itвЂ™s a Conventional, AGM, Gel Cell, Marine or Deep Cycle battery. Because of this, fast charging does not have negative effects on the capacity of the battery and on battery cycle-life. This allows the battery to be charged quickly, correctly, and completely when using a microprocessor controlled battery charger. Simply put, the charger collects information from the battery and adjusts the charge current and voltage based on this information. Advanced microprocessor controlled algorithms monitor the charging process to avoid battery damage caused by overcharging. A microprocessor controlled battery charger is designed to provide fast, safe and efficient charging to a wide variety of battery types and sizes.

Charge it battery charger manual