#Yardworks electric wood splitters manual#
#Yardworks electric wood splitters professional#

Wedges are easy to dismantle and can be sharpened using a file to get it back running. The chances of the wedge becoming blunt are high if you have been using it to cut down green or knotty logs. After used for a long time, the wedges become blunt, and it becomes difficult to cut as it should. If all this is absolutely in manner, then the need is to examine the wedge. First, in such circumstances, make sure the piece of wood is placed at a proper angle and is not too long. Sometimes everything seems to be running precisely in your device but, then too, the wedge is unable to split the log.

This will surely troubleshoot the issue, or maybe your system needs to be flushed thoroughly. Recheck the oil levels before tightening the bleed valve back. First, open the bleed valve and then oscillate the pressure plate 2-3 times. If the oil levels are at the exact mark, then there is a probability that there is air in the lines. Sometimes low oil level also causes vibration in the machine. If there is a vibration or shaking while using the splitter, you need to check the hydraulic oil level and refill it if needed.

If you notice that your splitter will not retract or seems weak to hold the pressure and is bogging down, which indicates that there is more pressure compared to the size of the hydraulic pump. Hydraulic systems are based on the mechanism where a pressurized fluid is released, which acts as the driving force and powers the machine to split the log.

They are relatively easy to locate and troubleshoot. Hydraulic issues in log splitters are typical like vibration or shaking, log splitter will not retract, etc. These clogging block the flow of air and bog down the engine. Regularly check the spark plug of your splitter and replace it if you notice carbon build-up because it is one of the main reasons the engine will not turn on.ДЄfter using the log-splitter, do not forget to clean the air filters and change them if you notice sawdust clogging. When you do not need the splitter for an extended period, drain fuels before keeping them in storage otherwise, old oil and gas can clog up your carburetor. Provide the right level of engine oil and gas for the proper working of the splitter. If your gadget is not starting or is causing trouble in staying operational, you must get your engine checked. You may see issues in the functioning of your machine if your engine is continuously neglected. Gas log splitters use a 4-stroke engine as the power source and hence have a high maintenance cost as they require frequent maintenance. Gas engines have a simple manufactural design and are very easy to work on. Also, take care of adequately attaching the parts if you dismantle them for storage purposes. If you feel any hindrance in the foot pedal or rodsвЂ™ movement, then apply some oil to break up the coat of rust or dirt that may have deposited in the joints.

#Yardworks electric wood splitters manual#

Since manual hydraulic splitter uses human force as the driving power source, they have simple design models and are straightforward to troubleshoot.

#Yardworks electric wood splitters professional#

It usually requires professional assistance to locate the machineвЂ™s error, and most of the time, purchasing a new splitter is more profitable than bearing the repair cost. Unluckily, electric engines are not meant to work quickly. Always use a cable that matches the ampere rating for optimal performance. Therefore, dispose of any worn-out extension cord you feel is not working suitably. This creates a poor electrical connection by breaking the wires inside. If you are using an extension cord, it may cause a problem because it becomes dry and cracks after extensive use. This is the most common problem with log splitters having an electric engine.Д¬heck your power outlets, make sure that they are operational, and not blow off the fuse. If your electric engine is not starting, then the first step you need to perform is to check your power source. Therefore, maximum log splitters deal with problems in their power source used to provide the hydraulic pressure. Nowadays, most of the log splitters available in the market use hydraulics to power the machine with force required to cut different sized woods.